
Indoors Or Out
It is rated for dry and wet locations, so it works on an indoor stairwell as readily as on an exposed outside wall with nothing overhead. Pairs either side of a door or a run along a fence both suit it.
Three Heights, Rising Output
The 6W version at 20 cm and 600 lumens marks a doorway or a gate without dominating it. The 24W version at 61 cm and 2400 lumens carries enough light to be genuinely useful along a path or a driveway edge.
Black Or White Finish
The aluminium body comes in black or white, so the strip either recedes into a dark facade or contrasts against it. The LED is integrated with no bulb to replace, and the fixture arrives preassembled out of the box.
Frequently asked questions
Can I use it indoors?
Yes. The Selby is rated for dry and wet locations, so an indoor stairwell, a hallway or a landing works as well as an exposed outside wall. The same fixture covers both, so there is no separate indoor version to look for. Just pick the size that suits the position you have in mind.
Which height should I take?
Three are offered, all 7 cm wide. The 6W is 20 cm high at 600 lumens and suits a doorway or a gate where you want a marker rather than a light. The 18W is 41 cm at 1800 lumens. The 24W is 61 cm at 2400 lumens and is the one for a path or a driveway edge.
Does it come in anything other than black?
Yes. Black and white are both available. Black sits quietly against dark cladding, brick or a charcoal painted facade. White reads cleanly on render and pale brick and keeps the strip visible as a detail by day. The acrylic face and the output are the same in either finish.
How does it fix to the wall?
It mounts flat on a concealed backplate, so nothing shows around the edge once it is up, and it sits close to the surface rather than standing proud. It arrives preassembled, and hardwiring is to a standard fixed connection, so the install is the backplate, the wiring and the fixture itself.
Do I ever need to change a bulb?
No. The LED is integrated, so there is nothing to fit at installation and nothing to unscrew later. The acrylic face sits flush in the aluminium body with no lamp holder behind it, which is how the strip stays this slim. It arrives preassembled, so the only work is the backplate and the wiring.



