
Fits Where Others Foul
At 2 cm deep the Nash clears a door swing, a narrow pier or a tight passage where a normal sconce would catch your shoulder. When clearance is the real constraint rather than brightness, this is the fixture that solves the problem.
Clean Vertical Wall Wash
Light leaves the slim body upward and downward, so you get a clean vertical wash on the wall rather than a spot of glare. Repeated along a passage or a boundary that reading of light and shadow keeps the wall line unbroken.
Metal Body, Glass Face
The body is metal with a metal and glass shade in black, so the front detail catches daylight rather than looking like a flat plastic panel. The LED is integrated and it arrives ready to wire with the fixing plate already fitted to the body.
Frequently asked questions
How far does it stick out from the wall?
It projects 2 cm, which is thinner than almost anything else in this category. That is the whole point of the fixture. In a doorway reveal, on a narrow pier or along a tight passage it stays clear of a door swing and of anyone walking past with bags or a bike.
How big is it and how much light does it give?
The body is 11 cm wide and 12 cm high, so it is genuinely compact on the wall. Output is 8W and 800 lumens, which is a good deal of light for that footprint and enough to wash a doorway or a passage wall properly rather than just marking a position.
Which colour temperature is offered?
There are two options, warm light at 3000K and white light at 6000K. Warm at 3000K suits brick, stone and a domestic entrance where you want the wash to feel soft. White at 6000K is a much cooler light and reads crisper on grey render, dark cladding or a passage you want to feel clearly lit.
Can it go on a fully exposed wall?
Yes. It is rated IP65 for exposed positions, so it does not need a porch roof or an overhang above it. That makes it usable on an open boundary wall or a gate pier as well as in the sheltered reveals and passages where its shallow depth is the main reason to pick it.
Is there a bulb, and how does it wire in?
There is no bulb. The LED is integrated so nothing is replaced over its working life. It hardwires to a standard fixed outdoor connection and accepts both 110 to 120V and 220 to 240V supply. It arrives ready to wire with the fixing plate already fitted to the body, so mounting is one step.



